Every screen separation job on your repair bench starts with a blade you can trust to hold its angle and stay exactly where your hand puts it, and the 2UUL BL05 Blade Dock Aluminum Magnetic Sliding Blade Holder Set builds that reliability into a compact aluminum alloy body designed for daily bench use. You open the holder with a smooth 180° sliding mechanism that lets you extend or retract the blade with one hand, so you keep your other hand free to steady the device or handle a heat gun during preheating. Inside the holder, a set of extra-strong built-in magnets grips the blade firmly along its full length, and that grip stops the blade from shifting, twisting, or slipping while you work a curved edge or push through stubborn adhesive, which matters when a single slip can crack a display or gouge a frame. The set ships with 10 complimentary #01 blades from the 2UUL BB01 Shark series, each blade carrying a distinctive shark-fin texture and a blade thickness of just 0.01mm, thin enough to slide into the narrow gap between a screen and mid-frame without forcing the joint open first. You get a dual-zone cutting edge on each blade: the longer edge section handles curved-screen separation, where you need a longer continuous stroke to follow the display's curve, while the shorter edge section suits flat-screen work, where a tighter, more controlled cut keeps you close to the frame edge. That zoning means one blade dock covers both screen geometries on your bench instead of forcing you to swap tools between flat-glass devices and curved-edge displays. The aluminum alloy body itself resists corrosion from flux fumes and cleaning solvents, survives an accidental drop off the workbench, and holds up against the wear that comes from repeated daily use in a busy repair shop, all while keeping a premium tactile feel in your hand rather than the hollow plastic feel of cheaper holders. At 56 x 54 x 8mm and a net weight of 70g, the holder sits comfortably in a tool tray or a technician's palm, and the compact footprint means it doesn't compete for space with your soldering iron, hot air station, or PCB holder on a crowded bench. In your daily repair workflow, this blade dock fits right at the disassembly stage, before you reach board-level work: you use it to separate the screen assembly from the mid-frame, cut through OCA glue residue left over from a previous screen replacement, and release adhesive brackets holding battery covers or back glass panels in place. Repair shops handling screen replacement, back glass replacement, and battery replacement jobs on a high-volume basis benefit from having a dedicated blade holder rather than loose blades floating around a drawer, since the magnetic dock keeps the blade oriented correctly and ready for the next job without you fishing for it or risking a cut from an exposed edge. For technicians running multiple repair stations, keeping one BL05 dock per station standardizes how blades get held and stored across your whole team, which cuts down on inconsistent technique and reduces blade mishandling on the shop floor. The holder pairs naturally with your existing screen opening fixtures, PCB separating tools, and preheating platforms, since screen separation almost always happens alongside heat application and prying, and having a magnetically secured blade frees you to coordinate those tools without worrying about where the blade sits mid-task. Whether you run a single-technician repair counter or a full-service center processing dozens of screen jobs a day, the BL05 gives you a dependable, corrosion-resistant blade holder built specifically for the repetitive precision work that screen separation and OCA removal demand.
