Mechanic iRock 5 Glass Breaking Pen – Back Glass Removal Tool for iPhone X to 11 Pro Max

When a customer walks in with a shattered back glass and an otherwise healthy phone, you don't want to spend twenty minutes picking at glass shards with a blade. The Mechanic iRock 5 handles that job in one controlled press. It works on an auto-spring blaster principle: you position the tip against the glass, apply light pressure, and the internal spring releases a sharp, concentrated impact strong enough to crack tempered rear glass without transferring shock into the motherboard, battery, or wireless charging coil sitting beneath it. The tip itself is machined from high-hardness tungsten steel, paired with an HSS steel body that holds its edge through repeated use on your bench. That matters if you're running a busy shop — a soft tip dulls fast and starts skidding across the glass instead of biting into it, which is exactly what damages camera rings and frame edges. This one keeps consistent bite even after heavy daily use. Coverage runs across the iPhone X, XS, XS Max, 11, 11 Pro, and 11 Pro Max generation, plus Huawei P series and Mate series rear panels. These devices share similar glass-to-frame bonding, so the same breaking technique and pressure calibration apply across the range. For iPhone 11 and later models specifically, it's best practice to remove the camera module, Face ID sensor, battery, and motherboard before you start blasting — that protects the components you're trying to save while you clear the glass around them. Technique matters more than force here. Work from the center outward, and stay away from the wireless charging coil zone in the middle of the back panel — a stray hit there turns a glass job into a coil replacement job. Avoid blasting directly on the frame edge too; that's where the glass is thinnest and most prone to spreading a crack into the housing itself instead of breaking cleanly. If you're working on a model outside the core X-11 range, back off the rear spring tension first and test on a scrap panel before going in on a customer's phone. This tool earns its place in a rear-glass repair workflow — after diagnosing camera glass cracks, back cover shatters, or frame lens damage, the iRock 5 is what actually gets the broken glass off the frame so you can move to adhesive removal and new panel installation. It's not a diagnostic tool or a flashing box; it's a hands-on mechanical step, and it belongs next to your heat gun, pry tools, and adhesive strips rather than your software station. At 102 x 18 x 18mm and 41g, it's light enough to sit in a shirt pocket or tool roll without adding bulk, and the metal housing takes the daily knocks of a repair bench without cracking or loosening internally. There's no retail box — it ships as a bare tool, which is standard for this category and keeps the price down for shops buying in bulk. If back glass jobs are a regular part of your service menu — cracked rear panels, camera glass replacement, frame lens repair — this is a tool you'll reach for on nearly every ticket that comes in with a shattered back.