Every repair shop running a Sunshine C1 Mini printer eventually hits the same wall: the sticker tray goes empty right when a customer is waiting for a custom back cover. This Only Sticker Set solves that exact problem by giving you a direct, drop-in refill built for the C1 Mini host, so you keep printing without touching the machine itself. The pack contains 36 printable stickers and 36 matching frosted lamination films, both cut to 195 x 100 mm, along with a fresh ribbon print cartridge that carries the color transfer for each print job. A 200 x 120 mm backing plate and a scraper come included too, and both matter more than they look because the backing plate holds the sticker flat during printing while the scraper helps you apply the frosted film cleanly without trapping air bubbles underneath. That last step is where a lot of technicians lose print quality on cheaper alternative sets, so having the correct scraper geometry saves you rework time. On the workflow side, you connect your phone to the C1 Mini over its one-click pairing, pick or upload the photo you want printed, whether it's a customer's own picture, a branded design, or something from Sunshine's built-in library, and the printer handles the rest using this sticker and ribbon combination. The frosted lamination is not just decorative. It carries a micro-matte coating that resists fingerprints, light scratches, and splash exposure, so the finished back cover holds its color and texture through normal daily handling. This matters for shop owners who sell these customized covers as a paid add-on service, since a print that fades or peels within a week brings the customer back for a refund instead of a repeat order. Because the sticker and film are both rated for devices and accessories under 7.5 inches, you're not limited to phone back covers alone. Tablets, mini pads, and smartwatch bodies all fall within that size window, which gives a repair shop a wider service menu from a single consumable set instead of stocking separate materials for each device category. From a repair workflow standpoint, this set sits in the accessory and personalization side of the business rather than the diagnostic or hardware repair side. You won't use it for board-level work, IC change, or software recovery, but it directly supports the screen refurbish and back cover replacement counter, where a shop upsells a printed, laminated cover alongside a screen or battery job. Many shops running Qualcomm and MediaTek device repairs use this exact upsell pattern: a customer comes in for a cracked screen or charging issue, and while the phone is being worked on, staff print a custom back cover using this same sticker set to add margin on the ticket. Stock management is simple with this set since it's a fixed-count consumable. You know exactly how many prints you get per pack (36), which makes it easy to price per-unit cost into your service menu instead of guessing material spend. Once a pack runs out, swapping in the next one takes under a minute since everything, sticker, film, plate, and scraper, is dimensioned to fit the same C1 Mini tray without adjustment. For a Pakistani repair shop floor where turnaround speed decides how many jobs you close in a day, that kind of predictable, no-calibration refill keeps the back cover printing station moving at the same pace as your screen and hardware repair counters.
