2UUL DA94 Z-Blade Pointed Tip Screen Opener – Mobile Phone Disassembly Tool

Every GSM technician knows the moment a screen opener fails halfway through separating a display — the blade bends, the tip snaps, or worse, it slips and cracks the LCD. The 2UUL DA94 Z-Blade solves that specific failure point with a pointed tip designed for exactly the situations where flat blades run out of reach.
The "Z" in the DA94 refers to its position in 2UUL's blade lineup, sitting alongside the X-Blade (square head, shallow 4mm depth for edge separation) and the Y-Blade (round head, 18mm depth for curved frame sections). The Z-Blade shares that same 18mm cutting depth but trades the round profile for a pointed tip, giving you access into corners, narrow bezels, and adhesive strips that a rounded edge can't pierce cleanly. If your workshop already runs the DA91 3-in-1 set, the DA94 is effectively that same Z-profile blade available on its own — useful when the pointed tip wears out faster than the other two from heavier daily use.
Material matters more than most technicians realize when picking screen openers. 2UUL builds the DA94 from a steel alloy that keeps its inherent flexibility instead of turning brittle after a few uses. You can bend it into a display gap and it springs back rather than deforming permanently or snapping under torque — a common complaint with cheaper generic openers sold loose in bulk. The edge itself goes through hand polishing rather than machine grinding alone, which is why the cutting line stays sharp enough for clean separation without dragging or catching on adhesive.
For daily workshop use, this blade fits into several parts of your repair workflow. During screen removal, the pointed tip lets you break through the adhesive seal at corners first, then work the blade along the edge to loosen the rest of the panel — much safer than forcing a flat blade under tempered glass. On dead phone diagnostics where you need to check the battery connector or logic board before committing to a full teardown, the Z-Blade gets you in and out without disturbing the flex cables around the display. It's equally useful during housing separation on phones with heavy adhesive frames, and for polarizer film work where a rounded or square edge just skids off the surface.
Technicians handling iPhone, Samsung, Xiaomi, Oppo, Vivo, and Infinix repairs all run into the same adhesive-heavy display designs, and the DA94's pointed profile works across that range rather than being locked to one brand's screen architecture. That's part of why it's become a standard bench tool rather than a specialty item — you reach for it on almost every screen job that comes across the counter, from a simple display problem to full housing kholna work on a badly damaged unit.
Durability is the other reason this blade earns a permanent spot in a technician's tool roll instead of getting replaced every few weeks. The corrugated internal structure of the steel resists the kind of stress fractures that make cheap blades snap mid-job, so you're not stopping mid-repair to dig out a backup. Combined with the ergonomic handle grip, it holds up through the kind of high-volume, back-to-back disassembly work that defines a busy Pakistani repair shop, where one tool might open thirty or more devices in a single day.