1 2
Brand: RF4

RF4 T2-OIS Core Soldering Iron Tips

RF4 T2-OIS Core Soldering Iron Tips

Rs.1,900.00 PKR
Rs.1,900.00 PKR
Sale Sold out
Shipping calculated at checkout.

RF4 T2-OIS Core Tips for Board Repair

The RF4 T2-OIS Core Soldering Iron Tips give your repair bench a replacement tip for RF4 T2 series integrated-core handpieces. You swap the worn tip, tin it, and get back to jumper lagana, flex pad cleanup, charging port rework and IC change karna on dead phone boards. A tired tip slows every hardware fault repair, so keeping a spare RF4 T2-OIS tip beside your station saves you from stopping a job halfway. Order from KB GSM Store and keep your workshop moving without waiting on a restock.

MST-SOLDERING-TOOLS-1597

⚖️ Weight: 0.5 kg

  • Safe & Secure Payment
  • Fast Delivery
  • WhatsApp Support
View full details

Description

RF4 T2-OIS Core Soldering Iron Tips for Daily Board Work Every technician knows the moment: the board is hot, the jumper wire is ready, and the tip refuses to take solder. The RF4 T2-OIS Core Soldering Iron Tips fix that bench problem by giving your RF4 T2 series handpiece a fresh working end. Tip condition decides whether a charging issue repair stays clean or ends with a lifted pad. A tip that tins well lets you finish IC change karna jobs, display connector rework and charging port repair without fighting the iron. KB GSM Store stocks the RF4 T2-OIS Core Soldering Iron Tips so workshops in Lahore, Karachi and Islamabad can replace a worn tip the same week they notice it.Where the RF4 T2-OIS Fits on Your Repair Bench RF4 builds its T2 series around an integrated heating core, so the heating element and the tip work as one replaceable unit. When the tip oxidises or wears down, you replace that unit and keep your handle, cable and station setup. You skip the cost and delay of buying a complete new iron, and a dead tip turns into a two-minute swap.Use it for the work that fills a technician’s day. You run jumper lagana on broken tracks, lift and resolder flex connectors, clear old solder off pads before reballing, and tack small components during board-level repair. Pair it with a hot air station for SMD removal, a microscope for pad inspection and a PCB holder to keep the board steady. The hot air station handles the heavy lifting while your soldering iron finishes the fine joints.Tip Care That Stretches Tip Life Treat the tip well and it pays you back. Tin it right after you power on and again before you switch off, because a coat of solder blocks oxidation. Never leave a powered iron sitting unused for long periods. Oxidation builds fast and can burn out the heating core. Use rosin-type flux while you solder, since it protects the tip from corrosion.Check your wiring before you connect the handpiece. A wrong connection can overheat the tip and destroy the core. Run the lowest temperature that melts your solder cleanly. Lead-free solder needs more heat, so raise the setting only when the job demands it, and drop it back afterward.Why Workshops Keep Spare Tips on the Bench A spare tip costs far less than an hour of lost repair time. When you chase a boot loop issue, a dead after flash board or a no-display fault, you often confirm shorts with a multimeter first, then rework the joint. A tip that heats evenly makes that second step faster and safer for the pads. Keep one RF4 T2-OIS tip in reserve, swap it when tinning gets difficult, and your soldering station stays productive through the busiest repair days. Browse KB GSM Store’s soldering stations, hot air stations, reballing kits and test boxes to complete the same workflow

Key Features

  • Replacement soldering tip for RF4 T2 series handpieces
  • Integrated core design that lets you replace the tip without changing your handle
  • Suited to jumper lagana on broken tracks
  • Handles pad cleaning before reballing
  • Works for flex connector and charging port rework
  • Supports small component tacking during board-level repair
  • Fits alongside hot air stations, microscopes and PCB holders in one workflow
  • Sold by KB GSM Store for Pakistani repair workshops

Specifications

Brand Entity RF4
Product Entity RF4 T2-OIS Core Soldering Iron Tips
Technology Entity Integrated heating core soldering tip, RF4 T2 series
Compatible Device Entities RF4 T2 series handpiece, RF4-ONE soldering station
Repair Process Entity Jumper wire soldering, pad cleaning, flex connector rework, charging port rework
Industry Entity Mobile phone repair, PCB repair, board-level rework

Compatible Devices

  • RF4 T2 series handpiece
  • RF4-ONE soldering station
  • Universal across phone brands, since it is a soldering tip and does not depend on a device model

Common Repair Uses

  • Jumper wire soldering on broken PCB tracks
  • Charging port and flex connector rework
  • Pad cleaning and solder removal before reballing
  • Small component tacking and touch-up on mobile boards
  • Display and battery connector rework

FAQ

What is the product name?
The product name is RF4 T2-OIS Core Soldering Iron Tips.
What is the brand of this product?
The brand of this product is RF4.
What is the model of this product?
The model of this product is T2-OIS.
What is this product used for?
This product is used for soldering work on mobile phone boards, including jumper lagana, pad cleaning and connector rework.
Which devices are compatible with this product?
This product pairs with RF4 T2 series handpieces and the RF4-ONE soldering station. It works on any phone board because it is a soldering tip.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which RF4 station should I use with the RF4 T2-OIS tip?
RF4 sells its T2 series tips for the RF4-ONE soldering station, so confirm your handpiece belongs to the T2 series before you order.
How do I stop the tip from oxidising and burning out the core?
Tin the tip before and after every session, never leave the powered iron idle for long, use rosin-type flux while soldering, and check the handpiece wiring before you connect it.

Ask any Query