Skip to product information
1 of 4
Brand: RF4

RF4 SPX 6.2X-60X Continuous Zoom Trinocular Stereo Microscope

RF4 SPX 6.2X-60X Continuous Zoom Trinocular Stereo Microscope

Regular price Rs.78,000.00 PKR
Regular price Sale price Rs.78,000.00 PKR
Sale Sold out
Shipping calculated at checkout.
Quantity

6.2X-60X Trinocular Microscope for Phone Repair

The RF4 SPX 6.2X-60X Continuous Zoom Trinocular Stereo Microscope gives your repair bench a smooth 6.2X to 60X zoom, PL 10X/23mm wide-field eyepieces, and a 30° tilted viewing angle for comfortable long sessions. You inspect pads, trace damaged tracks, and check BGA balls in true 3D depth, then add a camera or monitor through the trinocular port and the included CTV lens. The kit ships with an aluminum alloy plate, LED light, and column, so your bench setup arrives in one box. Order the RF4 SPX 6.2X-60X microscope from KB GSM Store for your repair workshop in Pakistan.

⚖️ Weight: 7.0 kg

SKU:MST-MICROSCOPES-174

  • Safe & Secure Payment
  • Fast Delivery
  • WhatsApp Support
View full details

Description

RF4 SPX 6.2X-60X Microscope: Clear 3D View for Board-Level Repair

When a dead phone lands on your bench, the first question never changes: what can you actually see on the board? The RF4 SPX 6.2X-60X Continuous Zoom Trinocular Stereo Microscope answers with a 6.2X to 60X continuous zoom range, a trinocular head, and PL 10X/23mm wide-field eyepieces. You move from a full-board scan to a close look at a single pad without swapping lenses. If your shop handles charging issue, display problem, and network issue boards every day, this range covers most of the inspection work between the first look and the final test.

Zoom Range and Optics That Match Real Repair Work

Low zoom shows the whole motherboard, so you spot burnt areas, liquid damage, missing components, and bent shield cans before you pick up a tool. Turn the zoom toward 60X and you study individual pads, broken tracks, solder bridges, and the edges of a BGA chip. The continuous zoom lets you stop at any point in the range, not just at fixed steps, so you pick the exact view your repair needs. The PL 10X/23mm wide-field eyepieces give you a generous field of view at every setting, which helps when you scan a crowded board around the CPU or PMIC. Because this is a stereo microscope, each eye sees a slightly different image. That depth cue matters when you lower a tweezer tip or soldering iron tip onto a pad the size of a grain of sand. Boards from every brand pack their parts tightly, and a wide zoom range means one microscope handles both the quick scan and the detailed close-up. You skip the hassle of keeping two separate tools on your bench, and you save the time you would spend switching between them.

30° Tilted Viewing Angle for Long Bench Sessions

A reballing job or a long micro-soldering session keeps your head in one position for a long time. The 30° tilted viewing angle lets you sit in a more natural posture instead of hunching over the board. You keep your hands under the lens, your eyes on the work, and your neck in a position you can hold through a full shift. Technicians who repair phones all day, including those who work through a queue of hang on logo and boot loop issue boards, feel the difference in comfort by the afternoon. Shop owners who train juniors also benefit, because a comfortable posture makes it easier for a new technician to practice fine work for longer.

Trinocular Port, CTV Lens, and Camera Options

The trinocular head adds a third port beside the two eyepieces, and the package includes a CTV lens for that port. You connect a compatible camera or display device and watch the same board on a monitor while you work. Customers see the fault with their own eyes, juniors follow your hand movements on screen, and you record before and after photos of every rework for your job files. The microscope supports optional cameras and display devices, and the package does not list a camera, so you choose the camera that fits your budget. A monitor view also speeds up quick checks, because you glance at the screen and skip the eyepieces. If you film repair tutorials or post workshop content, the trinocular setup turns your bench into a recording station. Check your camera’s mount against the CTV lens before you order, and ask KB GSM Store if you want help matching the two.

Aluminum Alloy Plate, LED Light, and Column Stand

The package includes the microscope, an aluminum alloy plate, an LED light, the CTV lens, and a column. The aluminum alloy plate gives you a flat, solid surface for the board you are working on. The column holds the microscope head above the plate so you place a hot air station nozzle, a soldering iron, and a PCB holder underneath without crowding the lens. Many technicians build a complete micro-soldering corner around this layout: a microscope on top, a soldering station and hot air station beside it, a multimeter within reach for continuity checks, and a reballing kit ready for chip work. The LED light brightens the board so you read tiny part markings and see flux residue clearly. Good light at the board also makes it easier to tell a clean solder joint from a cold joint before you close the phone.

Where This Microscope Fits in Your Repair Workflow

Start with diagnosis. After a liquid-damaged phone arrives, you inspect corrosion around connectors and ICs before any power test. For a dead after flash or no-power fault, you check the board for damaged pads, lifted tracks, and bad solder joints around the CPU, eMMC, or UFS chip. When an ISP pinout job needs a jumper wire on a tiny test point, the 60X end of the zoom helps you place that wire accurately. During rework, you watch the solder melt as you lift or replace an IC, then inspect the pads before you reball and refit the chip. After rework, you check every joint under magnification before the phone goes back for final testing. Soldering-heavy jobs benefit most: replacing a charging port, repairing a damaged connector pad, or re-tinning a lifted pad all demand steady visual feedback. Technical training institutes and repair academies also use trinocular scopes like this one, because an instructor and several students can watch the same board at the same time through a connected monitor. Buyers who compare the RF4 SPX 6.2X-60X Continuous Zoom Trinocular Stereo Microscope price in Pakistan will find KB GSM Store lists it as a full set with plate, light, CTV lens, and column, ready for a working bench.

If you currently use a magnifier lamp or a basic fixed-magnification scope, this microscope is a clear step up in range and depth. If you already run a lower-power trinocular model, the 60X top end and the 30° tilted head give you more reach for fine BGA and micro-soldering work. Pair it with hot air stations, soldering stations, PCB holders, multimeters, and reballing kits from the KB GSM Store catalog, and your bench handles everything from a quick inspection to a full chip-level repair.

Key Features

  • 6.2X–60X continuous zoom range for full-board scans and close pad inspection
  • Trinocular head with a third port for camera or display connection
  • 30° tilted viewing angle for comfortable long sessions
  • PL 10X/23mm wide-field eyepieces
  • CTV lens included for camera attachment
  • Supports optional cameras and display devices
  • Aluminum alloy plate included as a solid work surface
  • LED light and column included in the set

Specifications

Brand Entity RF4
Product Entity RF4 SPX 6.2X-60X Continuous Zoom Trinocular Stereo Microscope
Technology Entity Continuous zoom trinocular stereo optics, PL 10X/23mm wide-field eyepieces, CTV camera lens
Compatible Device Entities Universal — mobile phone motherboards and PCBs of any brand
Repair Process Entity Micro-soldering, BGA reballing, IC removal and replacement, PCB inspection
Industry Entity Mobile phone repair, PCB repair, GSM repair workshops

Compatible Devices

  • Universal — not device-specific; works for inspecting the motherboard of any mobile phone brand
  • Optional cameras and display devices (via the trinocular port and CTV lens)

Common Repair Uses

  • Micro-soldering of pads, tracks, and small components
  • BGA IC inspection, removal, and reballing
  • Checking CPU, eMMC, and UFS solder joints on dead phone and dead after flash faults
  • Spotting liquid damage and corrosion on connectors and ICs
  • Charging port and connector pad repair
  • Placing jumper wires on small test points for ISP pinout work
  • Post-rework solder joint inspection
  • Repair training and customer demonstration through a connected monitor

FAQ

What is the product name?
The product name is RF4 SPX 6.2X-60X Continuous Zoom Trinocular Stereo Microscope.
What is the brand of this product?
The brand of this product is RF4.
What is the model of this product?
The model of this product is SPX 6.2X-60X.
What is this product used for?
This microscope is used for board-level mobile phone and PCB repair, including micro-soldering, BGA inspection, reballing, and post-rework checks.
Which devices are compatible with this product?
It is universal and not device-specific. You use it to inspect the motherboard of any mobile phone brand.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can I connect a camera or monitor to the RF4 SPX 6.2X-60X?
Yes. The trinocular head has a third port, and the package includes a CTV lens. The microscope supports optional cameras and display devices. The package does not list a camera, so you buy one separately.
What zoom range and eyepieces does the RF4 SPX 6.2X-60X use?
It gives 6.2X to 60X continuous zoom through PL 10X/23mm wide-field eyepieces. Use the low end to scan the whole board and the high end to inspect pads, tracks, and BGA edges.

Ask any Query