Skip to product information
1 of 4

2X Lens For Microscope

2X Lens For Microscope

Regular price Rs.3,500.00 PKR
Regular price Sale price Rs.3,500.00 PKR
Sale Sold out
Shipping calculated at checkout.
Quantity

2X Lens For Microscope: Sharper View for Micro-Soldering The 2X Lens For Microscope doubles the zoom of your current setup, so you see tiny pads, broken traces, and lifted IC balls clearly. You do not need to buy a new microscope when your old one falls short on dead phone boards. Fit the lens, refocus, and your bench is ready for jumper lagana, IC change karna, and charging issue repairs on crowded PCBs. KB GSM Store stocks this lens for technicians and repair shops across Pakistan who want a practical upgrade at a shop-friendly price. Check your microscope’s mounting fit before ordering, and your workflow gets a real boost.

⚖️ Weight: 0.9 kg

SKU:MST-MICROSCOPES-138

  • Safe & Secure Payment
  • Fast Delivery
  • WhatsApp Support
View full details

Description

2X Lens For Microscope: Double Your View on Dead Phone Boards The 2X Lens For Microscope gives your existing microscope a second gear. When you chase a 0201 capacitor, a lifted pad under a BGA, or a hairline crack on a charging line, normal magnification often leaves you guessing. You fit this lens, and the same microscope shows the board at twice the zoom. You stop squinting and start soldering with confidence. Many Pakistani shops search for the price in Pakistan before anything else, because a full microscope upgrade costs far more than an add-on lens. KB GSM Store lists this lens as a practical fix for a weak bench setup.Where It Fits on Your Repair Bench Every GSM technician knows the moment: the phone is dead after flash, you suspect a hardware fault, and you need to inspect the board before you touch the hot air gun. Your microscope sits between diagnosis and repair, so a better view saves time at both stages. With the 2X Lens For Microscope, you inspect PMIC areas, charging IC pads, and display connector pins at higher zoom. You spot corrosion, burnt components, and cold joints that a lower zoom hides. After you finish the rework, you inspect your own soldering and confirm every joint is clean. This lens belongs next to your hot air station, soldering station, and PCB holder as part of a complete repair workflow. What You Check Before Buying An add-on lens helps only when it fits your microscope, so check three things first. Start with the mounting: measure the thread or mount on your microscope’s objective and confirm the lens matches. Next, expect the working distance to shrink when you raise the magnification. You get less space between the lens and the board, so plan your tweezers and soldering iron movement accordingly. Finally, give your microscope more light. Higher zoom shows a smaller area, and a bright LED ring light keeps the image clear. If you need a different zoom level or a trinocular camera setup later, browse the microscope accessories category at KB GSM Store for an upgrade path.Daily Use in IC Change and Micro-Soldering Think about a typical day at your repair bench. A customer brings a phone with a charging issue, and you trace the fault to a small IC near the USB port. You switch on the microscope, mount the 2X Lens For Microscope, and inspect the pads before you remove the old chip. After you lift the IC, you check the pads for damage at the higher zoom, and you place the new IC with precise alignment. The same lens helps with reballing checks, jumper wire repairs on broken tracks, and flex connector pin inspection. It also helps with boot loop issue and hang on logo cases that come from a hardware fault on the board. You work faster because you spend less time guessing and more time repairing.

Key Features

  • 2X magnification for closer inspection of small components
  • Upgrades your existing microscope without a full replacement
  • Clearer view of tiny pads, traces, and IC balls
  • Helps you inspect solder joints after rework
  • Supports precise IC change and jumper work
  • Fits a mobile repair workshop on a tight budget
  • Suits PCB, charging, and display connector inspection
  • Available at KB GSM Store Pakistan

Specifications

Brand Entity KB GSM Store
Product Entity 2X Lens For Microscope
Technology Entity Optical magnification lens
Compatible Device Entities Microscopes with a matching mount; any mobile phone PCB under inspection
Repair Process Entity PCB inspection, micro-soldering, IC change, jumper repair
Industry Entity Mobile repair industry

Compatible Devices

  • Universal — not phone-specific; you inspect any mobile phone PCB through your microscope
  • Fit depends on your microscope’s objective mount, so confirm the thread before ordering

Common Repair Uses

  • Inspecting charging IC and PMIC area pads on dead phone boards
  • Checking pads and traces after IC change karna
  • Verifying jumper lagana joints on broken tracks
  • Inspecting display and battery connector pins
  • Examining solder joints after BGA rework or reballing
  • Spotting corrosion and burnt components on liquid-damaged boards

FAQ

What is the product name?
The product name is 2X Lens For Microscope.
What is the brand of this product?
This product is sold by KB GSM Store Pakistan.
What is the model of this product?
The model of this product is 2X Lens For Microscope.
What is this product used for?
This product is used to double the magnification of your microscope for PCB inspection and micro-soldering.
Which devices are compatible with this product?
This product is universal for phone board inspection. It works with microscopes that have a matching mount.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Will the 2X Lens For Microscope fit my microscope?
Fit depends on the mount or thread of your microscope’s objective. Check the mount size on your microscope and compare it before you order.
Does a 2X lens reduce working distance for micro-soldering?
Yes. Higher magnification normally gives you less space between the lens and the board. Adjust your tweezers and iron position, and add extra light so the image stays bright.

Ask any Query