Amaoe A13 Magnetic BGA Reballing Positioning Platform With 0.10mm Stencil for A13 CPU Reballing Kit

Amaoe A13 Magnetic Reballing Platform: Steady Alignment for iPhone 11 CPU Work The Amaoe A13 Magnetic BGA Reballing Positioning Platform With 0.10mm Stencil for A13 CPU Reballing Kit targets one job: reballing the A13 CPU on iPhone 11 series motherboards. Every technician knows the pain of a stencil that shifts the moment hot air hits it. This platform solves that with magnetic positioning, so the chip and stencil stay put while you work. Amaoe sells it in its A7 to A14 magnetic platform range, and the A13 version comes with a 0.10mm thickness stencil. You pick it when you want a dedicated A13 setup instead of a universal stencil that you tape down and hope for the best.Why Magnetic Positioning Matters on Your Repair Bench When you do IC change karna or reball a CPU after a dead phone diagnosis, alignment decides the result. A stencil that moves even slightly leaves bridged or missing balls, and you start the whole job again. The magnetic base holds the stencil against the chip and keeps it there. You spend your attention on solder paste and heat instead of pinning a stencil down with tweezers. Before you start, clean the pads, remove old solder with flux and wick, and dry the surface. Then seat the chip in the positioning plate, set the stencil on top, and let the magnets lock the position.The 0.10mm Stencil and the A13 CPU Amaoe lists this platform with a 0.10mm thickness stencil for the A13 CPU. Stencil thickness controls how much solder each pad receives, so a thin stencil suits the fine-pitch pads on a modern Apple processor. Amaoe also lists separate A12 and A14 plates in the same range. Use this set for A13 work only and do not force it onto other chips. The A13 listing offers an upper positioning plate option and an all in one positioning plate option, so confirm which version you need before you order. That check saves you a return and a delay on a customer’s phone.Where It Fits in Your CPU Reballing Workflow Your job usually starts with a hardware fault: a boot loop issue, hang on logo, charging issue, or no power that traces back to the CPU area. After you lift the CPU with your hot air station and clean the pads, this platform takes over. You place the chip, set the stencil, apply paste, and heat until the balls form. Check the result under your microscope before you reflow the chip back onto the board. The platform sits comfortably next to Hot Air Stations, Microscopes, Reballing Kits, and PCB Holders, so you add no new steps to your routine. If your shop services many iPhone generations, the Amaoe A8 to A19 Pro CPU reballing platform covers A13 plus other chips and works as the natural upgrade.Buying Notes for Pakistani Repair Shops Shop owners who search for A13 reballing platform price in Pakistan want a tool that earns its cost on the first few boards. A dedicated A13 platform pays off when iPhone 11 motherboards come through your door every week. You cut re-do time, protect fragile pads, and give your technicians a repeatable method they all follow. Pair it with quality flux, fresh solder paste, and a steady hot air setup for the best balls. Order the Amaoe A13 Magnetic BGA Reballing Positioning Platform from KB GSM Store, match the option to your repair plan, and add it to your bench today.