Every repair counter in Pakistan sees the same jobs every day: cracked front glass on a curved display, a customer with a display problem after a fall, and a bent middle frame that needs a housing swap. The Mechanic 361 SE Plus 7-inch Rotary Heating Separator gives you one compact station for the heating, glue softening, and lifting work, so you no longer juggle a hot air gun, a loose suction cup, and an unsteady hand at the same time. Mechanic built this unit as a multi-function rotary separator for phone screens below 7 inches. The SE Plus version adds two upgrades over the standard 361 SE: a 45-degree left and right tilt for the platform, and a dedicated screen removal rack in the box. Both matter on a working bench. The tilt lets glue remover run into the seam and dissolve the adhesive from the inside out, and the rack holds the suction cup in a fixed position so a screw controls the lifting force instead of your wrist. The core of the machine is a 360-degree rotating heating platform on a high-precision bearing. You spin the phone to any edge without taking it off the heat or breaking your rhythm. When you work along a long curved edge or a stubborn corner with thick factory adhesive, you turn the platform instead of repositioning the handset. That keeps your cutting wire or opening pick at a steady angle and cuts down on cracked OLED panels and torn flex cables, the mistakes that eat into shop profit. The digital temperature control has an accurate on-screen readout, a three-gear switch for quick presets, and fine adjustment anywhere from 50°C to 130°C. That range covers the practical window for softening display adhesive. Fine-tuning lets you stay at the lower end for heat-sensitive panels instead of guessing with a hot air gun pointed at the glass. You set the value, let the platform reach it, and the panel warms evenly from below with no hot spot from one direction. Suction comes from a built-in pump, so you need no separate vacuum unit on the counter. The suction holds the glass while the screw tension system pulls upward. You turn the large-head thumb screw a little at a time, the pulling force rises gradually, and the seam opens under your control. Soft silicone suction cups grip the glass without point pressure, which helps keep the screen from bursting during the lift, and Mechanic includes a silicone pad to protect the panel surface on the platform. The screw-driven approach works on both straight and curved screens, and it turns a nervous frame swap into a predictable routine. Think about the real jobs that walk through your door. One customer brings a phone with shattered glass but a working display underneath, and you need to separate the glass for refurbishment without killing the OLED. Another has a touch not working complaint after a drop, and you need the screen off cleanly to check the connector and frame. A third needs a housing replacement because the middle frame bent in a pocket, so the whole display assembly has to come off the old frame in one piece for reuse. In all three cases, even heat, steady suction, and gradual pull decide whether you hand back a working phone or explain why the screen died on your bench. The 45-degree tilt is what separates the SE Plus from the base model in daily work. When you tilt the platform to one side, glue remover flows toward the seam you are opening, soaks the adhesive layer, and loosens it from inside rather than only from the edge you can reach. You then tilt to the other side and treat the opposite edge without removing the phone. On curved displays, the adhesive wraps around the edge and the glass flexes under stress, so this tilt-and-rotate workflow reduces the force you need and lowers the risk of a crack spreading across the panel. The machine stays bench-friendly. The body measures 188 × 130 × 250 mm and weighs 2.4 kg net. It runs on 110V/220V universal input at 400W, so it works on standard shop power in any Pakistani city without a step-down transformer. The box contains the separator, the silicone pad, the power cord, and the screen removal rack that ships only with the SE Plus. In your workshop flow, this separator handles the disassembly stage and pairs with the rest of your bench. After you lift the screen, you move to a hot air station or soldering station for connector, flex, or charging port work. A microscope lets you inspect pads and FPC connectors, and a PCB holder keeps the board steady once the job moves into board-level repair. If the phone shows a dead phone or hang on logo condition after the physical repair, you continue with a test box, multimeter checks, ISP pinout tools, eMMC programmers, and UFS adapters on the software and data side, and a reballing kit takes over when a BGA chip needs rework. The separator sits at the very start of that chain, so getting this first step right protects every step after it. For shop owners comparing screen separator machine options in Pakistan, the SE Plus makes the most sense when daily work includes curved displays, frame changes, and glass refurbishment, because the tilt and the removal rack target breakage on exactly those jobs. If you mainly handle flat screens, the standard 361 SE covers the basics, but a counter that sees regular curved-panel work gets clear value from the Plus features. Training institutes also benefit, because students learn controlled separation with a fixed rack and a visible temperature reading instead of picking up bad habits with a handheld heat gun. Setup takes minutes. Place the silicone pad and set your temperature with the three-gear switch or fine adjustment. Let the platform heat, attach the suction cup to the glass, and mount it to the rack. Then turn the thumb screw slowly while you work a pick or cutting wire around the seam, rotating the platform as you go. Keep the platform surface clean of old glue and solvent residue, check the suction cup for cuts or dust before each job so the seal holds, and let the unit cool before you store it. These habits keep the suction strong and the heat transfer even through daily bench use. The Mechanic 361 SE Plus 7-inch Rotary Heating Separator turns screen and frame separation into a controlled, repeatable process for any phone under 7 inches, whether the job is cracked glass refurbishment, a display swap, or a full housing change.
