Mechanic MAG10 Blade Knife Holder Set with 20Pcs Blades

Mechanic MAG10 Magnetic Blade Holder Set for Screen Glue RemovalA cracked display sits on your bench, the polarizer glue refuses to lift, and your blade keeps slipping. The Mechanic MAG10 Blade Knife Holder Set with 20Pcs Blades solves that problem at the handle. Mechanic designed the MAG10 as a magnetic handle that grabs single-sided and double-sided blades, and the pack comes with 20 blades so you never push a dull edge through glue. Repair shops reach for this kind of tool every day for screen separation, glue removal, and film cutting, and the MAG10 covers all three with one handle. If you search for a blade holder price in Pakistan, this set gives you the handle and a full blade stock in a single purchase.How the Magnetic Handle Holds Your Blade
Ten high-performance magnets sit inside the MAG10 handle. They pull a blade onto the handle the moment you bring it close, and they keep it firm and steady while you push through glue or film. The magnets do the holding, so a blade change takes seconds instead of minutes. That speed matters when you work through thick OCA glue and the edge dulls halfway through a job. The handle accepts both single-sided and double-sided blades, so you pick the edge that suits the cut in front of you. The double-sided blades come with a blade cover, and that cover protects your fingers while you swap and store them. The grip feels comfortable in your hand, and the force spreads evenly across your stroke, so you control the cut instead of fighting the knife. When you finish a job, store the blade with its cover so the edge stays sharp for the next display problem.
Blade Quality and Cutting PerformanceMechanic supplies thin, high-hardness blades with an extra-sharp double-sided edge. That edge cuts through thick cowhide and thick paper shells, so screen glue and protective film give it very little resistance. You scrape polarizer glue off a display, lift OCA dry glue, and trim film with clean, controlled strokes. Glass scraping also falls inside the use range, which helps when you clear stubborn residue from a broken screen. All 20 blades arrive in the same pack, so you rotate to a fresh edge the moment performance drops. A technician who handles many display problems every week burns through blades fast, and a 20-piece stock keeps your bench running without a trip to the market for refills. Press with light pressure on delicate glass and let the sharp edge do the work. Keep unused blades in the pack until you need them, and drop worn edges into a safe container instead of leaving them loose on the bench.Where the MAG10 Fits in Your Repair WorkflowThe MAG10 belongs to the screen-disassembly and cleaning stage of your repair workflow. After you heat the display and separate the glass, you pick up the MAG10 to clear leftover polarizer glue and OCA residue from the surface. Clean glue removal sets up the next step, whether you fit a new screen or move on to diagnosing a hardware fault on the board. The same handle also cuts film and leather, so it earns its place on your bench beyond a single job. Pair it with a Hot Air Station or heating plate for display separation, a Microscope for close inspection, and PCB Holders for steady work. Browse the repair blade and opening tool categories at KB GSM Store to complete your bench kit, and look at the Mechanic Mag Pro magnetic clamp if you want an upgrade path with a metal-body knife holder. A tidy bench starts with the right tool for each stage, and a magnetic blade handle removes one more source of delay between separating the screen and fitting the new one.