1 5

SUNSHINE SS-904A SE Android Battery Activation Board – Auto Polarity Detection

SUNSHINE SS-904A SE Android Battery Activation Board – Auto Polarity Detection

Rs.1,800.00 PKR
Rs.1,800.00 PKR
Sale Sold out
Shipping calculated at checkout.

Dead ya deep-discharged Android batteries ko workshop mein bina risk activate karne ke liye SUNSHINE SS-904A SE ek reliable snap-on solution hai. Board battery ki positive aur negative polarity khud detect karta hai, is liye jumper lagane ya wire check karne ki tension nahi rehti. 500+ Android models ke saath compatible hai aur 5A se zyada load par khud power cut kar deta hai, jisse board aur battery dono safe rehte hain. Charging mode mein LED blue rehti hai, full hone par red ho jati hai — ek nazar mein status pata chal jata hai. Chhota, halka aur bench par daily use ke liye banaya gaya tool hai.

MST-SOLDERING-ACCESSORIES-1086

⚖️ Weight: 0.05 kg

  • Safe & Secure Payment
  • Fast Delivery
  • WhatsApp Support
View full details

Description

Repair bench par sabse zyada aane wala issue "dead after flash" ya battery ka bilkul response na dena hota hai — aisi condition mein phone ka charging circuit khud battery ko charge start karne ka signal nahi bhejta. SUNSHINE SS-904A SE isi problem ko solve karne ke liye banaya gaya hai. Yeh ek Android series battery activation board hai jo battery ko directly snap-on karke bahar se controlled current dekar activate karta hai, taake phone assemble karne se pehle hi battery workable state mein aa jaye.

Board ka sabse practical feature auto polarity detection hai. Bohat se technicians ka time isi mein zaya hota hai ke battery connector ki positive aur negative pin kaunsi hai yeh check karte rehte hain — galat connection lagne se short bhi lag sakta hai. SS-904A SE mein built-in identification resistor circuit hai jo battery snap karte hi polarity khud pehchan leta hai, is liye connection lagane mein ghalti ka chance nahi rehta aur kaam seedha shuru ho jata hai.

Activation process bhi seedha hai: battery ko board ke connector par snap karein, board ko ek compatible DC power supply (jaise SUNSHINE P-1505TD ya similar) se USB output ke zariye connect karein, aur voltage ko 5V ke around set karein. Jab tak battery charge ho rahi hoti hai, LED blue solid rehti hai — full charge hone par yeh red ho jati hai. Is visual indication se technician ko baar baar multimeter check karne ki zaroorat nahi padti.

Safety ke lehaz se board mein overload protection built-in hai. Agar output current 5A se zyada ho jaye — chahe battery fault ki wajah se ho ya power supply ki galat setting ki wajah se — board automatically power cut kar deta hai. Yeh feature battery ko overheat ya swell hone se bachata hai, aur board ko bhi damage se protect karta hai, jo daily heavy-use workshop environment mein kaafi zaroori hai.

Compatibility ke lihaz se yeh board Android series ke 500+ models ke saath kaam karta hai, jin mein Xiaomi, Vivo, Oppo, Realme aur HTC jaisi popular series ki batteries shamil hain. Chahe issue "boot loop", "dead after flash", ya simple "battery discharge" ka ho, is tool se battery ko phone se bahar hi activate karke workflow tez kiya ja sakta hai — jo especially un cases mein useful hai jahan phone assemble karne ke baad battery response nahi deti aur dobara khol kar check karna padta.

Design chhota aur snap-on type hai, is liye bench par extra jagah nahi ghairta aur beginners bhi easily operate kar sakte hain — koi soldering ya jumper lagane ki zaroorat nahi. Yeh tool ISP/UFS/eMMC workflow ke saath bhi complement karta hai: jab kisi dead board par diagnostic se pehle battery activate karna zaroori ho, tab yeh board pehla step ban jata hai.

Overall, SUNSHINE SS-904A SE un technicians ke liye banaya gaya hai jo apne battery-related repair time ko kam karna chahte hain aur ek safe, foolproof activation method chahte hain — chahe wo ek chhoti mobile repair shop ho ya ek busy service center.

Key Features

  • Automatic positive/negative polarity detection
  • Built-in identification resistor circuit
  • Snap-on design — no soldering or jumper required
  • Overload protection with automatic power cut-off at 5A
  • LED status indicator: blue while charging, red when full
  • Compatible with 500+ Android phone models
  • Compact, bench-friendly build
  • Works with standard DC power supply via USB output

Specifications

Brand Entity SUNSHINE
Product Entity SS-904A SE Battery Activation Board
Technology Entity Auto Polarity Detection Circuit
Compatible Device Entities Android Series Smartphones
Repair Process Entity Battery Activation, Diagnostics
Industry Entity Mobile Repair Tools, GSM Technician Equipment

Compatible Devices

Android 500+ models across multiple brands (Xiaomi, Vivo, Oppo, Realme, HTC and other Android series) — general Android battery-connector compatibility scope, not a fixed model list

Common Repair Uses

Battery activation for dead or deep-discharged Android batteries, quick charging/testing of built-in batteries before reassembly, first-step diagnostic activation before board-level repair (ISP/UFS/eMMC workflows)

FAQ

What is the product name?
The product name is SUNSHINE SS-904A SE Android Battery Activation Board.
What is the brand of this product?
The brand of this product is SUNSHINE.
What is the model of this product?
The model of this product is SS-904A SE.
What is this product used for?
This product is used for activating dead or discharged Android phone batteries outside the device before reassembly.
Which devices are compatible with this product?
This product is compatible with 500+ Android series models across multiple brands.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does this board automatically detect battery polarity, or do I need to check positive/negative manually?
Yes, it has a built-in identification resistor circuit that automatically detects positive and negative polarity, so manual checking isn't needed.
What happens if the current exceeds safe limits during activation?
The board has automatic overload protection that cuts off power when current exceeds 5A, protecting both the battery and the board.