YCS Divine Dragon 2-in-1 UV Curing Light with Cooling Fan

H2: YCS Divine Dragon 2-in-1 UV Curing Light with Cooling Fan for Phone PCB Repair
The YCS Divine Dragon 2-in-1 UV Curing Light with Cooling Fan puts two jobs into one compact unit on your repair bench. You cure UV glue with the 3W light, then you switch to the fan and bring the board temperature down within seconds. If you do IC change karna, CPU work or PCB repair every day, you know how much time goes into waiting for a hot board to cool and for glue to set. This tool cuts that waiting and keeps your workflow moving. Shop owners in Pakistan often search for a UV curing fan price in Pakistan because one unit replaces two separate accessories. You save bench space, you save time, and you finish more boards per day.H3: How the UV Curing and Cooling Functions Work Together
You get a 3W UV light for fast glue curing and a 1W fan built for rapid cooling. The fan takes air in from the rear and pushes it out through the front, so the airflow lands on the board area you work on. Rapid cooling happens within 3 seconds, which helps right after hot air work when you want to handle the board without delay. One button switches between curing mode and heat dissipation mode, so your hands stay on your tweezers instead of hunting for separate switches. An LED indicator shows the working status, so you always know which mode is running. The UV light uses heat dissipation LED beads, which help the unit last through daily shop use. You no longer need a separate lamp and a separate blower on your bench.
H3: Smoke Exhaust and Compact Bench Design
Soldering and hot air work on a hardware fault board throws fumes straight toward your face. The YCS Divine Dragon also handles smoke exhaust, so you pull fumes away from your breathing zone while you work. The body measures 60x56x40mm and weighs 104.2g, so it sits beside your PCB holder and microscope without crowding the bench. You place it close to the board and move it as the job changes. Small repair shops with packed benches value this size more than any number on a spec sheet. A lighter tool also means you reposition it quickly between boards and keep your rhythm during long repair sessions.
H3: Where It Fits in Your Mobile Repair Workflow
This tool belongs to the cooling, curing and finishing stage of mobile PCB repair. After you change an IC or work on a CPU with your hot air station or soldering station, you cool the board quickly and move on to testing. When a repair uses UV glue, you cure it under the light instead of waiting for it to set on its own. It works well beside your Hot Air Stations, Soldering Stations, Microscopes and PCB Holders, and you can pair it with a Smoke Fume Extractor if your shop wants stronger fume control. If your volume grows, you can step up to a BGA Rework Station for heavier board work. Charging issue and network issue boards often end their repair with a cooling and curing step, so this unit earns its place on the bench every day. You get a practical, low-cost addition that supports your hands-on repair routine.