YCS Y005 Heating LCD Separator 7-inch Price in Pakistan

YCS Y005 Heating LCD Separator 7-inch: Vacuum Screen Separation for Pakistani Repair Shops.Every shop that does display work knows the problem. A cracked glass sits on top of a working LCD, and one wrong move with the wire ruins the panel. The YCS Y005 Heating LCD Separator 7-inch handles this job with a built-in vacuum pump, a 7-inch heating surface, and a digital display on one bench-top unit. You do not need a separate hot plate, a clamp, and a guessing game. You place the screen, switch on the vacuum, let the heat soften the adhesive, and cut. For a shop that does screen replacement every day, it turns a risky step into a repeatable one.How the vacuum and heating plate work together.The heating plate warms the screen assembly so the adhesive between the glass and the display loses its grip. At the same time, the built-in vacuum pump pulls the screen flat against the surface. This matters most when the glass is cracked, because a cracked screen flexes and slips under your hand. With the vacuum holding it, you pull the separation wire through the adhesive layer with steady pressure and no sideways movement. The digital display shows you the heat setting, so you stop guessing how hot the plate runs. You get a controlled setup instead of a hot plate and a lot of luck.Where it fits in your display repair workflow.The Y005 sits at the start of your screen refurbishing and glass replacement workflow. You separate the broken glass from the display first. Then you clean the old adhesive from the panel, fit the new glass, and test the touch and picture before you close the phone. It also helps with display problem jobs where the LCD still works and only the glass needs to change. When a phone comes in with a charging issue and a cracked screen together, you can separate the glass first and keep the original panel for the job. Check the separated panel under your microscope before you rebuild it, because a hairline fault shows up there before it costs you a return.Setting up your bench around the Y005.Put the unit on a flat, stable bench with space to pull the separation wire in a straight line. Keep a PCB holder or soft mat nearby so you can park the frame and the board safely while the screen heats. If you also use a hot air station or soldering station on the same bench, keep the separator away from the airflow so it heats evenly. Run the vacuum before you start the cut, and make sure the screen sits flat on the plate. A good seal gives you the grip you need, and a loose seal gives you a slipping panel. Keep the plate surface clean, because dust and old adhesive weaken the hold.Choosing the Y005 over a basic hot plate, and your upgrade path.A plain hot plate warms the screen but does nothing to hold it. You end up pinning the phone with one hand and cutting with the other, which is where most panels crack. The YCS Y005 adds the vacuum grip, so you keep both hands on the wire and the work stays steady. If your shop grows and you want a different style of separation, YCS also sells the YCS Y007 rotary separator, which makes a clear next step. Until then, the Y005 gives a shop owner a practical machine at a sensible workshop price. Browse our screen separators, microscopes, and hot air station categories to build the rest of your display repair setup